\[\begin{split}\newcommand{\as}{\kw{as}} \newcommand{\Assum}[3]{\kw{Assum}(#1)(#2:#3)} \newcommand{\case}{\kw{case}} \newcommand{\cons}{\textsf{cons}} \newcommand{\consf}{\textsf{consf}} \newcommand{\Def}[4]{\kw{Def}(#1)(#2:=#3:#4)} \newcommand{\emptyf}{\textsf{emptyf}} \newcommand{\End}{\kw{End}} \newcommand{\kwend}{\kw{end}} \newcommand{\even}{\textsf{even}} \newcommand{\evenO}{\textsf{even}_\textsf{O}} \newcommand{\evenS}{\textsf{even}_\textsf{S}} \newcommand{\Fix}{\kw{Fix}} \newcommand{\fix}{\kw{fix}} \newcommand{\for}{\textsf{for}} \newcommand{\forest}{\textsf{forest}} \newcommand{\Functor}{\kw{Functor}} \newcommand{\In}{\kw{in}} \newcommand{\Ind}[4]{\kw{Ind}[#2](#3:=#4)} \newcommand{\ind}[3]{\kw{Ind}~[#1]\left(#2\mathrm{~:=~}#3\right)} \newcommand{\Indp}[5]{\kw{Ind}_{#5}(#1)[#2](#3:=#4)} \newcommand{\Indpstr}[6]{\kw{Ind}_{#5}(#1)[#2](#3:=#4)/{#6}} \newcommand{\injective}{\kw{injective}} \newcommand{\kw}[1]{\textsf{#1}} \newcommand{\length}{\textsf{length}} \newcommand{\letin}[3]{\kw{let}~#1:=#2~\kw{in}~#3} \newcommand{\List}{\textsf{list}} \newcommand{\lra}{\longrightarrow} \newcommand{\Match}{\kw{match}} \newcommand{\Mod}[3]{{\kw{Mod}}({#1}:{#2}\,\zeroone{:={#3}})} \newcommand{\ModA}[2]{{\kw{ModA}}({#1}=={#2})} \newcommand{\ModS}[2]{{\kw{Mod}}({#1}:{#2})} \newcommand{\ModType}[2]{{\kw{ModType}}({#1}:={#2})} \newcommand{\mto}{.\;} \newcommand{\nat}{\textsf{nat}} \newcommand{\Nil}{\textsf{nil}} \newcommand{\nilhl}{\textsf{nil\_hl}} \newcommand{\nO}{\textsf{O}} \newcommand{\node}{\textsf{node}} \newcommand{\nS}{\textsf{S}} \newcommand{\odd}{\textsf{odd}} \newcommand{\oddS}{\textsf{odd}_\textsf{S}} \newcommand{\ovl}[1]{\overline{#1}} \newcommand{\Pair}{\textsf{pair}} \newcommand{\plus}{\mathsf{plus}} \newcommand{\SProp}{\textsf{SProp}} \newcommand{\Prop}{\textsf{Prop}} \newcommand{\return}{\kw{return}} \newcommand{\Set}{\textsf{Set}} \newcommand{\Sort}{\mathcal{S}} \newcommand{\Str}{\textsf{Stream}} \newcommand{\Struct}{\kw{Struct}} \newcommand{\subst}[3]{#1\{#2/#3\}} \newcommand{\tl}{\textsf{tl}} \newcommand{\tree}{\textsf{tree}} \newcommand{\trii}{\triangleright_\iota} \newcommand{\Type}{\textsf{Type}} \newcommand{\WEV}[3]{\mbox{$#1[] \vdash #2 \lra #3$}} \newcommand{\WEVT}[3]{\mbox{$#1[] \vdash #2 \lra$}\\ \mbox{$ #3$}} \newcommand{\WF}[2]{{\mathcal{W\!F}}(#1)[#2]} \newcommand{\WFE}[1]{\WF{E}{#1}} \newcommand{\WFT}[2]{#1[] \vdash {\mathcal{W\!F}}(#2)} \newcommand{\WFTWOLINES}[2]{{\mathcal{W\!F}}\begin{array}{l}(#1)\\\mbox{}[{#2}]\end{array}} \newcommand{\with}{\kw{with}} \newcommand{\WS}[3]{#1[] \vdash #2 <: #3} \newcommand{\WSE}[2]{\WS{E}{#1}{#2}} \newcommand{\WT}[4]{#1[#2] \vdash #3 : #4} \newcommand{\WTE}[3]{\WT{E}{#1}{#2}{#3}} \newcommand{\WTEG}[2]{\WTE{\Gamma}{#1}{#2}} \newcommand{\WTM}[3]{\WT{#1}{}{#2}{#3}} \newcommand{\zeroone}[1]{[{#1}]} \end{split}\]

Variants and the match construct

Variants

Command Variant variant_definition with variant_definition*
variant_definition::=ident_decl binder* | binder*? : type? := |? constructor+| decl_notations?

The Variant command is similar to the Inductive command, except that it disallows recursive definition of types (for instance, lists cannot be defined using Variant). No induction scheme is generated for this variant, unless the Nonrecursive Elimination Schemes flag is on.

This command supports the universes(polymorphic), universes(template), universes(cumulative), and private(matching) attributes.

Error The natural th argument of ident must be ident in type.

Private (matching) inductive types

Attribute private(matching)

This attribute can be used to forbid the use of the match construct on objects of this inductive type outside of the module where it is defined. There is also a legacy syntax using the Private prefix (cf. legacy_attr).

The main use case of private (matching) inductive types is to emulate quotient types / higher-order inductive types in projects such as the HoTT library.

Example

Module Foo.
Interactive Module Foo started
#[ private(matching) ] Inductive my_nat := my_O : my_nat | my_S : my_nat -> my_nat.
my_nat is defined
Check (fun x : my_nat => match x with my_O => true | my_S _ => false end).
fun x : my_nat => match x with | my_O => true | my_S _ => false end : my_nat -> bool
End Foo.
Module Foo is defined
Import Foo.
Fail Check (fun x : my_nat => match x with my_O => true | my_S _ => false end).
The command has indeed failed with message: case analysis on a private type.

Definition by cases: match

Objects of inductive types can be destructured by a case-analysis construction called pattern matching expression. A pattern matching expression is used to analyze the structure of an inductive object and to apply specific treatments accordingly.

term_match::=match case_item+, return term100? with |? eqn*| endcase_item::=term100 as name? in pattern?eqn::=pattern+,+| => termpattern::=pattern10 : term|pattern10pattern10::=pattern1 as name|pattern1 pattern1*|@ qualid pattern1*pattern1::=pattern0 % scope_key|pattern0pattern0::=qualid|{| qualid := pattern* |}|_|( pattern+| )|number|string

Note that the pattern ::= pattern10 : term production is not supported in match patterns. Trying to use it will give this error:

Error Casts are not supported in this pattern.

This paragraph describes the basic form of pattern matching. See Section Multiple and nested pattern matching and Chapter Extended pattern matching for the description of the general form. The basic form of pattern matching is characterized by a single case_item expression, an eqn restricted to a single pattern and pattern restricted to the form qualid ident*.

The expression match term return term100? with patterni => termi+| end denotes a pattern matching over the term term (expected to be of an inductive type \(I\)). The termi are the branches of the pattern matching expression. Each patterni has the form qualid ident where qualid must denote a constructor. There should be exactly one branch for every constructor of \(I\).

The return term100 clause gives the type returned by the whole match expression. There are several cases. In the non-dependent case, all branches have the same type, and the return term100 specifies that type. In this case, return term100 can usually be omitted as it can be inferred from the type of the branches 1.

In the dependent case, there are three subcases. In the first subcase, the type in each branch may depend on the exact value being matched in the branch. In this case, the whole pattern matching itself depends on the term being matched. This dependency of the term being matched in the return type is expressed with an ident clause where ident is dependent in the return type. For instance, in the following example:

Inductive bool : Type := true : bool | false : bool.
bool is defined bool_rect is defined bool_ind is defined bool_rec is defined bool_sind is defined
Inductive eq (A:Type) (x:A) : A -> Prop := eq_refl : eq A x x.
eq is defined eq_rect is defined eq_ind is defined eq_rec is defined eq_sind is defined
Inductive or (A:Prop) (B:Prop) : Prop :=   | or_introl : A -> or A B   | or_intror : B -> or A B.
or is defined or_ind is defined or_sind is defined
Definition bool_case (b:bool) : or (eq bool b true) (eq bool b false) :=   match b as x return or (eq bool x true) (eq bool x false) with   | true => or_introl (eq bool true true) (eq bool true false) (eq_refl bool true)   | false => or_intror (eq bool false true) (eq bool false false) (eq_refl bool false)   end.
bool_case is defined

the branches have respective types "or (eq bool true true) (eq bool true false)" and "or (eq bool false true) (eq bool false false)" while the whole pattern matching expression has type "or (eq bool b true) (eq bool b false)", the identifier b being used to represent the dependency.

Note

When the term being matched is a variable, the as clause can be omitted and the term being matched can serve itself as binding name in the return type. For instance, the following alternative definition is accepted and has the same meaning as the previous one.

Reset bool_case.
Definition bool_case (b:bool) : or (eq bool b true) (eq bool b false) := match b return or (eq bool b true) (eq bool b false) with | true => or_introl (eq bool true true) (eq bool true false) (eq_refl bool true) | false => or_intror (eq bool false true) (eq bool false false) (eq_refl bool false) end.
bool_case is defined

The second subcase is only relevant for annotated inductive types such as the equality predicate (see Section Equality), the order predicate on natural numbers or the type of lists of a given length (see Section Matching objects of dependent types). In this configuration, the type of each branch can depend on the type dependencies specific to the branch and the whole pattern matching expression has a type determined by the specific dependencies in the type of the term being matched. This dependency of the return type in the annotations of the inductive type is expressed with a clause in the form in qualid _+ pattern+, where

  • qualid is the inductive type of the term being matched;

  • the holes _ match the parameters of the inductive type: the return type is not dependent on them.

  • each pattern matches the annotations of the inductive type: the return type is dependent on them

  • in the basic case which we describe below, each pattern is a name ident; see Patterns in in for the general case

For instance, in the following example:

Definition eq_sym (A:Type) (x y:A) (H:eq A x y) : eq A y x := match H in eq _ _ z return eq A z x with | eq_refl _ _ => eq_refl A x end.
eq_sym is defined

the type of the branch is eq A x x because the third argument of eq is x in the type of the pattern eq_refl. On the contrary, the type of the whole pattern matching expression has type eq A y x because the third argument of eq is y in the type of H. This dependency of the case analysis in the third argument of eq is expressed by the identifier z in the return type.

Finally, the third subcase is a combination of the first and second subcase. In particular, it only applies to pattern matching on terms in a type with annotations. For this third subcase, both the clauses as and in are available.

There are specific notations for case analysis on types with one or two constructors: if then else and let (…,…) := in (see Sections Pattern-matching on boolean values: the if expression and Irrefutable patterns: the destructuring let variants).

1

Except if the inductive type is empty in which case there is no equation that can be used to infer the return type.